Upcut spiral router bit
Lifts chips up and out of the cut. Fast and clean-bottomed, for slots and pockets in solid wood.
- Shank 1/4" or 1/2" (6, 8 or 12 mm)
- Cut 1/8" to 3/4" (3 to 16 mm)
- 1, 2 or 3 flutes
The right bit for every cut.
CNC router bits in inch and metric, plus saw blades, collets, boring bits and edge bander tooling. Tell the bit finder what you are cutting, size the bit, and add it to your list for pricing.
Router bits
Eleven profiles in inch and metric. Tap Choose sizes on any bit to build it in the bit finder.
0 on your list
Downcut spiral router bit
Pushes chips down so the top face stays crisp. Made for melamine, laminate and veneered panels.
- Shank 1/4" or 1/2" (6, 8 or 12 mm)
- Cut 1/8" to 3/4" (3 to 16 mm)
- 2 or 3 flutes
Compression spiral router bit
Up-cut and down-cut flutes on one bit, so both faces of a sheet come out chip-free. The go-to bit for nesting.
- Shank 1/4" or 1/2" (6, 8 or 12 mm)
- Cut 1/8" to 3/4" (3 to 16 mm)
- 2 or 3 flutes
Straight 2-flute router bit
Straight flutes for everyday cutting, dadoes and rabbets in wood and MDF.
- Shank 1/4" or 1/2" (6, 8 or 12 mm)
- Cut 1/8" to 3/4" (3 to 16 mm)
- 2 flutes
Single O-flute router bit
One polished flute clears chips fast, so acrylic, PVC and aluminum cut clean without melting.
- Shank 1/4" or 1/2" (6, 8 or 12 mm)
- Cut 1/8" to 3/4" (3 to 16 mm)
- 1 flute
V-groove router bit
Crisp sign lettering, chamfers and folding grooves in aluminum composite panels.
- Angle 60°, 90° or 120°
- Diameter 1/4" or 1/2" (6 or 12 mm)
- 2 flutes
Tapered engraving router bit
A fine tapered tip for detailed engraving, small lettering and inlays.
- Tip 0.010" to 1/16" (0.2 to 1.5 mm)
- 1 flute
Ball nose router bit
A rounded tip for 3D carving, relief panels and smooth contoured surfaces.
- Shank 1/4" or 1/2" (6, 8 or 12 mm)
- Cut 1/8" to 3/4" (3 to 16 mm)
- 2 flutes
Surfacing / spoilboard router bit
A wide cutter that flattens slabs, end-grain boards and spoilboards in fewer passes.
- Shank 1/2" (12 mm)
- Cut 1" to 3" (25 to 76 mm)
- 2 or 3 flutes
Roundover router bit
A bearing-guided round edge for tabletops, shelves and cabinet doors.
- Radius 1/8" to 1/2" (3 to 12 mm)
- 2 flutes
Chamfer 45° router bit
A bearing-guided 45° bevel for edges, joinery and decorative profiles.
- Size 1/8" to 1/2" (3 to 12 mm)
- 2 flutes
Bit finder: build your exact bit
Start from the material and the job, or pick a bit type. Every choice updates the drawing and the size list.
I am cuttingto
Bit type
Measurement
Shank
Cutting diameter
Angle
Cutting length
Flutes
Compression spiral
Shank
Cut diameter
Cut length
Flutes
Need several sizes or a quantity? Add each one, then note quantities in your request.
Blades, holders & boring bits
Choose the type and size, then add it to your list.
Saw blades
Main, scoring and panel-saw blades for sliding table saws, beam saws and panel saws.
BladeTipCollets & tool holders
ER collets and tool holders for CNC router spindles.
TypeSizeBoring bits
Dowel, hinge and through-hole bits for line boring and CNC boring.
BitRotationEdge bander knives & cutters
Trim knives, pre-milling cutters and corner rounding tools for edge banders.
ToolTipTooling for a machine or a job?
Tell us the machine, the material and the cut, or send your list. We reply within one business day with pricing and availability.
Your project list 0
Nothing added yet. Tap Add to my project on any service, or just tell us below.
